Each kind of sunshade can be divided into fixed sunshade and controllable sunshade. The main form of Luoyang telescopic awning is curtains. Compared with the external sunshade, its thermal insulation performance is poor, but it can block the outside line of sight and meet the needs of indoor privacy. Green shading is a way of planting climbing plants on the facade of buildings. In addition, according to the shape and effect, the building sunshade system can be divided into five types: baffle type, horizontal type, vertical type, comprehensive type and shutter type. The baffle sunshade system is usually parallel to the window.
Use or store rubber soft joints, should avoid high temperature, ozone, oil and acid-base environment. Sunshade racks should be built for pipes used outdoors or facing the sun and the wind, and exposure, rain and wind erosion are strictly prohibited. Paint and winding thermal insulation materials are strictly prohibited on the joint surface. Due to the aging problem of rubber products, it should be inspected and replaced in time. It is very important to choose a suitable rubber joint, if you do not choose the right rubber soft joint to work, then the service life of the rubber soft joint will be greatly reduced due to the influence of the external environment and internal medium. not only a waste of resources, but also may lead to heavy damage to the whole pipeline or even have to be rebuilt, then the loss outweighs the gain. Return to Sohu to see more
In addition, some small equipment can also make the car less suffering from the hot sun, such as anti-explosion film, explosion-proof film with ultraviolet reflection and other functions, better thermal insulation effect. Car sunshade is also a good choice, car sunshade can reflect heat to achieve the purpose of cooling, if the front window glass covered with sunshade, can reduce the heat by more than 70%.
For example, the east-west outward doors and windows of the house can use baffle sunshade to reduce building energy consumption and improve the indoor thermal environment of the building. Today, the “Plan” for Energy Saving and Emission reduction has been issued, in which the overall goal of emission reduction is put forward, and the national chemical oxygen demand and total emission are controlled at tens of thousands of tons, tens of thousands of tons and tens of thousands of tons respectively, and the specific targets such as tens of thousands of tons and tens of thousands of tons of new reduction capacity are required by
6. Energy saving and environmental protection: electric shutter windows can achieve the appropriate indoor temperature by adjusting sunshade, which can effectively reduce the heat load of air conditioning, absorb solar radiation energy and reduce heating load in winter, thus saving energy and reducing consumption. 5. Heat preservation and heat relief: electric shutter windows can effectively prevent strong outdoor light, maintain a steady state for indoor temperature, and are more suitable for work.